Zaloudek's Marine Honda Engines -
Large Motors 115HP  -
Better features for better boating

Zaloudek's Marine - Honda Marine Logo

Performance and Efficiency

  • 4-Stroke design, based on the Honda Accord
  • Dual Overhead CAM (DOHC)
  • BLAST®System
  • Multi-port Programmed Fuel Injection (PGM-FI)
  • Lean Burn Control®
  • Largest Displacement Engine - At 144 cubic inches, the BF115 has 21% more displacement than any competitor in it's class. The long-stroke design increases torque to deliver outstanding performance and efficiency.
  • Balanced Engine - Twin counter-rotating balancing shafts help minimize internal engine vibrations, thus providing smooth operation throughout the entire RPM range.
  • LAF & Knock Sensors - Linear Air Fuel (LAF) and knock sensors help determine correct fuel flow and ignition curve to maximize performance and fuel efficiency.
  • Engine Command System - The Engine Command Module receives constant input from 18 sensors located throughout the engine. It determines the correct fuel flow and ignition curve, providing optimum performance.
Zaloudek's Marine Honda Engines Large Motors 115HP

Reliability and Durability

  • 3-Way Cooling System
  • Engine Alert System - Uses visual, audio and RPM reduction circuits to alert the operator of overheating, low oil PSI, over-revving, water in fuel, battery condition, and critical engine functions.
  • 4-Front Corrosion Protection
  • Fresh Water Flushport - Flushes debris and saltwater out of the engine, extending the life of the outboard.
  • Stainless Steel (Steering Arm, Tilt Tube and all Shafts) - Stainless steel components provide durability with long-term corrosion resistance.
  • Ultra Low 3 Star CARB Emissions
  • True 5 Warranty


Convenience and Ease of Use

  • NMEA 2000 Protocols
  • High Output Charging
  • Variable Speed Trolling - Another great advantage for fisherman is the 115’s optional push-button variable speed trolling control. Simply push up or down in 50 RPM increments from 650 RPM to 900 RPM.
  • Easy maintenance - An easy "screw-type" valve adjuster system requires no shims and reduces maintenance costs. Front-mounted oil filter and oil filler make for easy maintenance.
  • Built-In Pitot Tube - Built-in pitot tube in the gear case eliminates the need to drill holes in your boat for installation.

Zaloudek's Marine Honda Engines Large Motors 115HP


Zaloudek's Marine Honda Engines Large Motors 115HP



Type 4-Stroke DOHC, 4 Cylinder/16 Valves
Displacement 2354 cc (144 cubic inches)
Bore & Stroke 87 mm x 99 mm (3.43 x 3.9 inches)
Full Throttle RPM Range 4,500-6,000 RPM
Rated Power 115 HP @ 5,250 RPM
Idling Engine Speed Range 750 + 50 RPM
Optional Variable Trolling Range 650 RPM (Adjustment range: 650-900RPM)
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 68°


Gear Ratio 2.14:1 (30/14)
Gear Shift F-N-R


Alternator  (Electric Start) 55 Amps Total (40 Amps Charging)
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard


Overall Width 680 mm/22.8 inches

Dry Weight

L-Type 217 kg/478 lbs.
X-Type 220 kg/485 lbs.

Transom Height

L Type 508 mm/20 inches
X Type 635 mm/25 inches