Zaloudek's Marine Honda Engines -
Large Motors 200HP  -
Explore the unknown with confidence

Zaloudek's Marine - Honda Marine Logo

Performance and Efficiency

  • BLAST® System
  • 4-Stroke design
  • Large Displacement V6
  • Dual Stage Induction
  • Lean Burn Control®
  • Oxygen (O2) and Knock Sensors - Oxygen (O2) and knock sensors help determine the correct fuel flow and ignition curve to maximize performance and fuel efficiency.
  • Balanced Engine - The 60° V6 fires every 60°, offering the best in balance and durability and providing smooth operation throughout the entire RPM range.
  • Tuned Dual Exhaust - Some competitor's exhaust tracks goes through the middle of the oil pan, pre-heating the oil. Honda's dual exhaust headers wrap around the outside of the oil pan. This reduces heat build-up, and increases engine efficiency and performance.
  • Multi-port Programmed Fuel Injection (PGM-FI)
  • Non-Linear Mounting System
  • Counter Rotation - Improves efficiency, hull maneuverability and decreases driver fatigue.
Zaloudek's Marine Honda Engines Large Motors 200HP

Reliability and Durability

  • Extreme Duty Gearcase - The BF200 offers a larger, 5 inch diameter gear case, built to withstand the extreme duty cycles of law enforcement and military patrol boats.
  • Saltwater Protection - Honda has painted the interior cooling passages on the BF200. This process prolongs the engine's life in the harsh saltwater environment.
  • World Famous Quality - The BF200 shares many components with the Honda Ridgeline, Odyssey, Honda Pilot and Acura MDX, gaining years of proven Honda engineering, precision manufacturing and reliability.
  • Engine Alert - The ECM monitors vital engine functions and prevents engine damage by alerting the operator of:
    • Overheating
    • Water in Fuel
    • Low Oil PSI
    • Battery
    • Over-Rev
    • Critical Engine Function
  • 2-Pass Cooling System - The unique cooling system maintains an even temperature on all cylinders. The incoming water passes through each aluminum exhaust manifold, then through the cylinder heads and back around the exhaust manifolds before entering the exhaust. This results in increased cooling efficiency and long-term durability!
  • Positive Lubrication - A crankshaft-driven, automotive-style trochoid oil pump ensures long-term durability of critical engine components.
  • Single Latch Cowl - A single front-mounted latch combines with 4 securing points to ensure a water-tight seal.
  • Sealed Starter - The starter motor is inverted into a sealed chamber that protects the starter drive from the elements.
  • 4-Front Corrosion Protection
  • Fresh Water Flushport - Flushes debris and saltwater out of the engine, extending the life of the outboard.
  • Stainless Steel (Steering Arm, Tilt Tube and all Shafts)- Stainless steel components provide durability with long-term corrosion resistance.
  • Ultra Low 3 Star CARB Emissions
  • True 5 Warranty


Convenience and Ease of Use

Zaloudek's Marine Honda Engines Large Motors 200HP


Zaloudek's Marine Honda Engines Large Motors 200HP


Zaloudek's Marine Honda Engines Large Motors 200HP



Type 4-Stroke SOHC, 60° V6, 24 Valve
Displacement 3,471 cc (212 cubic inches)
Bore & Stroke 89 mm x 93 mm (3.5 x 3.7 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 200 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 72°


Gear Ratio 1.86:1
Gear Shift F-N-R


Alternator  (Electric Start) 90 Amp (1118 watt)
Battery Charging Power 60 Amps (756 watts)
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard


Overall Width 580 mm/22.8 inches

Dry Weight

L-Type 267 kg/588 lbs.
X-Type 277 kg/610 lbs.

Transom Height

L Type 508 mm/20 inches
X Type 635 mm/25 inches