Zaloudek's Marine Honda Engines - Portables 9.9HP Lightweight, dependable power

Zaloudek's Marine - Honda Marine Logo

Performance and Efficiency

  • 4-Stroke Design
  • Available with Power Thrust Design (BFP) - The combination of the 2.33:1 gear ratio and the 10" x 6 1/2" Power Thrust 4-blade propeller creates 60% more thrust in reverse and 15% more in forward. The result is improved maneuverability and performance.
  • Reverse Exhaust Relief
  • Auto Start Enrichment (ASE)
  • Easy One Hand Starting - Working together, a built-in decompression release and digital CDI system set the ignition timing during start-up. This greatly reduces the effort required to pull-start the engine by hand!
  • PGM Ignition - A reliable microprocessor accurately controls ignition timing during start-up and across the entire RPM range, providing optimum overall operation.
  • Pendulum Mount System
  • EZ Steer Friction Control
  • Shallow water drive - An innovative shallow water drive feature lets you tilt the motor up, allowing you to easily operate in shallow areas. Shallow water drive greatly reduces the risk of engine damage.
Zaloudek's Marine Honda Engines Portables 9.9HP 

Reliability and Durability

  • 4-Front Corrosion Protection
  • Positive Lubrication - A crankshaft-driven, automotive-style trochoid oil pump ensures long-term durability of critical engine components.
  • Engine Alert System - The integrated warning system protects the engine from severe damage due to low oil, over-revving and overheating.
  • One-piece cast head and engine block - A one-piece cast head and engine block provide additional strength, while lowering the engine's weight.
  • Ultra low 3 star CARB emissions
  • True 5 Warranty


Convenience and Ease of Use

  • High Output Charging - The BF9.9 provides 2 Amps at 1000 RPM and an amazing 12 amps at 3000 RPM. This helps to maintain the battery charge or keep electronics going - even at trolling speeds.
  • Lightweight Rounded Design - Easy to transport, BF9.9 is perfect for small boats, dinghies or auxiliary. The ergonomic design is rounded to avoid catching fishing line.
  • Longer Tiller Handle - A convenient longer tiller handle improves control and reduced steering effort. The extended handle is made of a lightweight composite, increasing its durability while decreasing the motor's weight.
  • Up Front Tiller Controls - A convenient front-mounted shift lever allows fingertip shifting. The Twist Grip Throttle & Tensioner minimize driver fatigue.
  • Power Tilt - Conveniently tilts the engine out of the water for easy lift-off and transport.
  • Integrated Carrying Handle - A integrated carrying handle makes transporting the engine a breeze. The convenient, foldaway carry handle is situated at the exact top/bottom balance point of the engine. This means the engine carries more easily in a level position.
  • Available in 15-, 20- and 25-inch shaft models
Zaloudek's Marine Honda Engines Portables 9.9HP



Zaloudek's Marine Honda Engines Portables 9.9HP



Zaloudek's Marine Honda Engines Portables 9.9HP



Type 4-Stroke SOHC, 2 Cylinder/4 Valves
Displacement 222 cc (13.5 cubic inches)
Bore & Stroke 58 mm x 42 mm (2.3 x 1.7 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 9.9 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery 1 Carburetor
Ignition System PGM-IG
Starting System Electric/Recoil
Exhaust Through Hub
Lubrication Wet Sump
Trim Range 5-Stage: 4°, -8°, -12°, -16°, -20°
Tilt Range 72°


Gear Ratio 2.33:1
Gear Shift F-N-R


Alternator with voltage regulator (Electric Start) 12-Amp (148 watt)
Alternator with voltage regulator (Manual Start) 6-Amp (76 watt)
Propeller 4-Blade Aluminum
Diameter x Pitch, Standard 9 1/4 x 8 inches
Diameter x Pitch, Power Thrust 10 x 6.5 inches
Power Tilt Available
Power Trim & Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard


Overall Width 345 mm/13.6 inches

Dry Weight

S-Type 42 kg/92 lbs.
L-Type 44 kg/98 lbs.
X-Type 48 kg/107 lbs.

Transom Height

S Type 381 mm/15 inches
L Type 508 mm/20 inches
X Type 635 mm/25 inches